bdec-online home pageNotes: This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.
Includes: Machine Guns; Brushes, Machine Gun and Pistol.
Excludes: Turrets, Aircraft.
21 suppliers registered
Includes: Breech Mechanisms; Mounts; Grenade Launchers for Integral-Cartridge Grenades, Single-Shot or Auto-Loading or Automatic-Firing.
8 suppliers registered
Includes: Breech Mechanisms; Mounts; Rammers.
8 suppliers registered
Includes: Breech Mechanisms; Power Drives; Gun Shields.
7 suppliers registered
Includes: Firing Platforms; Mounts; Gun Shields.
5 suppliers registered
Includes: Gun Yokes; Rammers; Reflectors.
3 suppliers registered
Includes: Breech Mechanisms; Training Gears; Power Drives.
2 suppliers registered
Includes: Flame Throwers; Smoke Generators.
5 suppliers registered
Includes: Depth Charge Tracks; Torpedo Tubes.
11 suppliers registered
Includes: Airborne Rocket Launchers adaptable to guided missile use.
Excludes: Specifically designed Airborne Guided Missile Launchers; Jettisonable Rocket Launchers; Launcher Fairings designed for specific airframes; Rifle Grenade Launchers; Grenade Launchers for Integral-Cartridge Grenades, Single-Shot or Auto-Loading or Automatic Firing
17 suppliers registered
Notes: This class includes nets and booms for harbor defense only.
2 suppliers registered
6 suppliers registered
Includes: Dummy Artillery, Aircraft and Vehicles; Garnished Nets.
14 suppliers registered
Includes: Components and Accessories used on or with weapons falling in two or more classes of Group 10.
3 suppliers registered
Includes: Line Throwing Guns; Catapult Guns; Bayonets; Saluting Guns; Signal Guns; Flare Guns; Barrage Balloons; Accessories, not elsewhere classifiable, for weapons in this group; Expendable Bomb Dispensers.
27 suppliers registered
Notes: This group includes, in particular, nuclear ordnance training weapons, practice ballistic units, and all components specially designed therefor, when not specifically classified elsewhere. Also included in the group are specially designed simulators and mockups which are integral parts of the above. Excuded from this group are general purpose nose cones, case sections, flare sections or centre sections designed to carry payloads other than nuclear and/or for use on a missile, rocket, or re-entry vehicle to attain the necessary aerodynamic configuration.
Includes: Ballistic cases, tail assemblies, retardation devices, and other peculiar components which are not classifiable elsewhere.
Excludes: Parachute canopies and canopy hardware.
Notes: This class includes nuclear weapons (including bombs), which are designed to be dropped from an aircraft.
1 suppliers registered
Includes: Ogive sections, body sections, bases, and other peculiar components which are not classifiable elsewhere.
Notes: This class includes nuclear weapons which are designed to be propelled from a recoilless rifle, gun, howitzer, or the like, and which are not designed to be self-propelled.
No suppliers registered at present
Includes: Components and parts peculiar to the warhead or warhead section, which are not classifiable in more specific classes.
Excludes: Such components as fuzing and firing devices, nuclear components, high explosive components, classifiable in more specific classes, and items such as projectiles and bombs which include the entire outer case of a weapon.
Notes: Note This class includes nuclear warheads (without or assembled with case sections, adaption kits, and/or fuzing and firing components) which are to be used in or with bombs, rockets, projectiles, missiles, demolition charges, or the like. Also includes case sections, nose cones, flare sections, center sections, and auxiliary structural components of missiles, rockets, and re-entry vehicles which are designed or constructed for exclusive use with or for housing of nuclear warheads and/or warhead sections.
1 suppliers registered
Notes: This class includes nuclear weapons which consist of depth charge bodies assembled with nuclear warheads. It includes training weapons and all specially designed components which are not classifiable elsewhere.
No suppliers registered at present
Includes: Outer cases, case sections, and other peculiar components, which are not classifiable elsewhere.
Notes: This class includes nuclear weapons which are designed to be emplaced in or near a structure, area, or the like, which is to be destroyed. The weapons may include accessories.
No suppliers registered at present
Includes: Components peculiar to assembled rockets which are not classifiable elsewhere.
Excludes: Rocket Motors; Warhead Components; Rocket Components classified in other FSC classes.
Notes: This class includes nuclear weapons, consisting of rocket bodies assembled with nuclear warheads, which comprise a single item of supply and are issued as such.
No suppliers registered at present
Notes: This class includes collections of items used for the purpose of converting nuclear weapons from one configuration to another.
No suppliers registered at present
Includes: such items as fuzes, power supplies, firing sets, x-units, cables, safing devices, adaption kits, and re-entry vehicle nuclear ordnance arming and fuzing systems.
2 suppliers registered
Includes: All components which contain or simulate nuclear active materials.
Excludes: end items, such as bombs, projectiles, warheads, and the like.
1 suppliers registered
Notes: This class includes actual and simulated explosive and pyrotechnic components peculiar to all nuclear ordnance end items, such as bombs, demolition charges, rockets, projectiles, warheads, and related systems. Excluded from this class are all explosive and pyrotechnic components designed for other than nuclear ordnance applications.
2 suppliers registered
Includes: Specially designed trucks and trailers for nuclear ordnance; Specially designed slings and hoists; Operational, test, and setting devices, and cradles; Conditioning Kits and Sets, Controlled Environment.
Excludes: Hand tools; Instruments for use on both nuclear ordnance and other equipment; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes in the FSC.
8 suppliers registered
Includes: Items common to more than one class or items not properly fitting into the foregoing classes of nuclear ordnance.
1 suppliers registered
Notes: Fire control assemblies, subassemblies, and components are classified: a. In appropriate classes of this group when: (1) Designed for multiple applications to different kinds of fire control equipment. (2) Modified for use with guided missile remote control systems. (3) Designed specifically for shipborne guided missile remote control systems. (4) Radar equyipment, designed specifically for fire control systems. (5) Both day and night viewing characteristics are incorporated into an integral unit. b. In Class 1270 or 1280, when designed specifically for aircraft gunnery or aircraft bombing fire controol respectively. c. In Class 1430, when designed specifically for guided missile remote control systems, except shipboard type. d. In appropriate classes of Group 58, when designed for multiple applications to both fire control and communication equipment. e. In appropriate classes of Group 58 when designed for night vision.
9 suppliers registered
12 suppliers registered
Notes: This class includes only complete fire control systems. Anything less than a complete system, such as individual end items, assemblies, parts, attachments, or accessories for use in fire control systems are classified in classes other than this class.
20 suppliers registered
Includes: Periscopes for Submarines; Range and Height Finders; Telescopic Sights; Optical Instruments Integrated with Fire Control Equipment.
27 suppliers registered
7 suppliers registered
Includes: Turret, Gun, Torpedo Mount, and Searchlight Indicating Equipment; Target Designating Equipment; Synchro Systems.
13 suppliers registered
Includes: Fire Control Transmitters, Transmitter-Receivers, Receivers, Receiver-Regulators.
Excludes: Fire Control Transmitting and Receiving Equipment, Specially Designed for use on or with Fire Control Radar Equipment.
7 suppliers registered
Includes: Turrets, Aircraft; Computers, specifically designed; Complete Gyro Mechanisms.
Excludes: Gun Chargers; Ammunition Boxes; Gun Heaters; Field and Link Chutes; Ammunition Boosters; Gyro Components; Complete Fire Control Systems.
7 suppliers registered
Includes: Computers, specifically designed; Complete Gyro Mechanisms; Optical Instruments for Bombing Fire Control.
Excludes: Gyro Components; Optical Elements, such as Lens, Prisms, Filters.
6 suppliers registered
Includes: Radar Sets, Assemblies, Subassemblies, and Components Specially Designed for use on or with Fire Control Equipment.
5 suppliers registered
Notes: This class includes airborne, shipborne, and submarineborne sonar sets, assemblies, subassemblies, and components designed specificially for use with underwater fire control equipment.
3 suppliers registered
Includes: Fuze Setters; Ordnance Cable Systems; Aiming Circles; Flash and Sound Ranging Sets; Fire Control Components and Subassemblies Not Classifiable in Other Classes of Group 12.
59 suppliers registered
Notes: Excluded from this group are items specially designed for nuclear ordnance application.
Includes: Components.
22 suppliers registered
Includes: Components, except Fuzes and Primers; Chemical Warfare Cartridges.
Excludes: Fuzes and Primers.
9 suppliers registered
Includes: Components, except Fuzes and Primers; Pyrotechnic Cartridges and Projectiles; Chemical Warfare Cartridges and Projectiles.
Excludes: Fuzes and Primers.
7 suppliers registered
Includes: Components, except Fuzes and Primers; Chemical Warfare Projectiles.
Excludes: Fuzes and Primers.
6 suppliers registered
Includes: Components; Photoflash Bombs; Chemical Warfare Bombs; Bomb Clusters.
7 suppliers registered
Includes: Components; Hand and Rifle Grenades; Smoke Grenades.
Excludes: Firing Devices (Launchers).
10 suppliers registered
Includes: Warheads Containing Military Chemical Agents; Exercise Heads, Guided Missile.
Excludes: Atomic Ordnance Warheads; All other Warheads for use on other than guided missiles; Liquid Propulsion Units; Rocket Engines (Liquid Propellant Units); JATO Units; Rocket Motors (Solid Propellant Units) for Guided Missiles; Solid Fuel Propulsion Units; Propellant Chemicals encased in consumable containers, such as squibs and cartridges for insertion into missile propulsion systems as integral parts.
8 suppliers registered
Includes: Rocket Motors (Solid Propellant Units) for Guided Missiles, Explosive-Loaded; All Explosive Components for Guided Missile and Space Vehicle Solid Fuel Propulsion Units; Solid Propellants encased in consumable containers, such as squibs and cartridges, intended for insertion into missile propulsion systems as integral parts.
Excludes: Rocket Motors (Solid Propellant Units) for Guided Missiles, Inert-Loaded or Empty; All Inert (Nonexplosive) Components for Guided Missile and Space Vehicle Solid Fuel Propulsion Units; Guided Missile Warheads and Components; Rocket Propulsion Units; Rocket Motors (Solid Propellant Units) for Rockets; Solid Propellants predetermined to specific quantity and quality, but packaged in reusable containers.
4 suppliers registered
Includes: Rocket Motors (Solid Propellant Units) for Guided Missiles, Inert-Loaded or Empty; All Inert (Nonexplosive) Components for Guided Missile and Space Vehicle Solid Fuel Propulsion Units.
Excludes: Rocket Motors (Solid Propellant Units) for Guided Missiles, Explosive-Loaded; Guided Missile Warheads and Components; Rocket Propulsion Units; Rocket Motors (Solid Propellant Units) for Rockets.
6 suppliers registered
Includes: Complete Rounds; Explosive Components, Including Warheads; Pyrotechnic Rockets; Solid Fuel JATO Units; Rocket Motors (Solid Propellant Units) for Rockets; Covers, Protective Rocket Warhead; Jettisonable Rocket Launchers; Conditioning Kits and Sets, Controlled Environment; and other peculiar components which are not classified elsewhere.
Excludes: Nuclear rockets, Nuclear warheads; all other warheads for use on other than rockets; and rockets with built-in guiding devices.
11 suppliers registered
Includes: Components; Antipersonnel Mines; Antitank Mines; Fuzes.
1 suppliers registered
Includes: Parachute Packs; Inert Mine Cases; Booster Cans; Clock Delays; Clock Starters; Search Coils; Extenders.
4 suppliers registered
Includes: Loaded Cases; Boosters; Detonators.
6 suppliers registered
Includes: Includes: Complete operating units, such as an underwater mine reconnaissance device, as well as component parts, practice, training, blank, and dummies.
Excludes: Excludes: Torpedo Inert components, depth charges, and underwater mines.
Notes: Note: Version of Underwater Mine Disposal Explosive Device without destructive charge. Intended for underwater mine hunting and reconnaissance. May also be used for training purposes.
10 suppliers registered
Includes: Complete explosive device, including ammunition, detonating charge, and component parts.
Excludes: Underwater Mine Explosive Components (FSC 1351), Torpedo Explosive Components (FSC 1356), Military Chemical Agents (FSC 1365).
Notes: Note: Complete explosive devices, including destructive charge. It is fired, guided to target and detonated from a vessel or other remote site.
8 suppliers registered
9 suppliers registered
Includes: Warheads; Boosters; Detonators.
4 suppliers registered
Includes: Inert Firing Mechanisms; Pistols without Detonators; Extenders.
3 suppliers registered
Includes: Cases; Boosters; Detonators.
2 suppliers registered
Includes: War Gases; Screening Smokes; Incendiary and thickening Agents; Signaling Smokes.
Excludes: Ammunition containing Military Chemical Agents.
No suppliers registered at present
Includes: Flares; Signals; Fireworks; Pistol Rocket Signals.
Excludes: Pyrotechnic Cartridges and Projectiles; Photoflash Bombs; Pyrotechnic Rockets.
26 suppliers registered
Includes: Items for construction, quarrying and demolition work such as Dynamite and other explosives packed in cylindrical paper cartridges or in bags, Demolition Charges, Blasting Caps, Blasting Time Fuses, Detonating Cord, Demolition Firing Devices; Booby Trap Mechanisms; Bangalore Torpedoes; Inert accessories and components such as Blasting Machines, Priming Adapters, and Detonating Cord Clips.
Excludes: Liquid Propellant Fuels and Oxidizers; Solid Propellants encased in consumable containers, for insertion into missile propulsion systems as integral parts; Guided Missile Explosive Devices; Safety-in-Flight Explosive Items and Devices such as, Impulse Cartridges, Delay Cartridges, Aircraft Ejection Seat Catapults, Aircraft Canopy Removers, and simular items, as shown in the indexes to the FSC, Solid Propellants, predetermined to specific quantity and quality, packaged in reusable containers; Nuclear Ordnance Components; Rocket and Guided Missile Motors, Warheads, and Propulsion Sections.
16 suppliers registered
Includes: Solid Propellants, predetermined to specific quantity and quality, packaged in reusable containers; Explosive Loaded Devices and Components as shown in the indexes to the FSC.
Excludes: Liquid Propellant Fuels and Oxidizers; Solid Propellants encased in consumable containers, for insertion into missile propulsion systems as integral parts; Guided Missile Explosive Devices; Blasting and Demolition Materials; Safety-in-Flight Explosive Items and Devices such as Impulse Cartridges, Delay Cartridges, Aircraft Ejection Seat Catapults, Aircraft Canopy Sections; similiar items, as shown in the indexes to the FSC.
6 suppliers registered
Includes: Impulse Cartridges; Delay Cartridges; Engine Starter Cartridges (explosive filled); Fire Extinguisher Cartridges (used to activate by remote control); Aircraft Ejection Seat Catapults; Rocket Motors (Solid Propellant Units) for Aircraft Ejection Seats; Aircraft Canopy Removers; Thrusters, propellant and Cartridge actuated; Initiators; Explosive Bolts and Explosive Bolt Cartridges; Cutters, cartridge or propellant actuated, Reefing Line; powder actuated Tool Cartridges; Explosive Loaded Devices and Components which are not Specifically classified elsewhere.
Excludes: Liquid Propellant Fuels and Oxidizers; Solid Propellants, encased in consumable containers for insertion into missile propulsion systems as an integral part; Guided Missile Explosive Devices; Bulk and Solid Propellants, predetermined to specpecific quantity and quality, packaged in reusable containers; Blasting and Demolition materials; Rocket Motors, Warheads and Propulsion Section for Rockets and Guided Missiles
Notes: This class includes safety-in-flight explosive items, consisting of a quantity of propellant (either encased in a cartridge or in molded form) and a means of activation, designed to be inserted into or attached to one or more devices to provide the energy required to operate devices requiring a time delay, or not requiring a time delay, in their operating sequence. Also included are devices designed to utilize energy generated by the items described above
20 suppliers registered
Excludes: Nonspecialized or common tools and equipment not developed exclusively for use by qualified EOD personnel; specialized demolition material; explosive loaded shaped charges.
Notes: This class includes only specialized tools and equipment developed for and used by qualified Explosive Ordnance Disposal (EOD) personnel.
29 suppliers registered
Excludes: Nonspecialized or common tools not developed exclusively for use by qualified EOD, UDT, and/or SEAL personnel; specialized demolition material; explosive loaded shaped charges
Notes: This class includes only specialized tools and equipment developed for and used by qualified Explosive Ordnance Disposal (EOD), personnel, Underwater Demolition Teams (UDT), and/or Sea-Air-Land (SEAL) personnel
20 suppliers registered
Excludes: Fuzes and Primers for ammunition not classified in Classes 1310, 1315, and 1320.
Notes: This class includes only fuzes and primers for use in ammunition classified in Classes 1310, 1315, and 1320.
14 suppliers registered
Includes: Ammunition Shapes, such as Blanks, Disks, Slugs, Cups, and Rotating Bands (Shell Bands).
22 suppliers registered
Includes: Handling and servicing equipment specially designed for use on or with rockets and conventional ammunition.
Excludes: Handling and servicing equipment specially designed for use on or with rocket and pyrotechnic launchers; Ammunition maintenance and repair shop specialized equipment; Handling equipment specially designed for aircraft or airfield use.
24 suppliers registered
Includes: Complete Drones, initially designed as missiles, but converted to drone use.
Notes: This class includes only complete guided missiles, with or without warheads and explosive components, whether in assembled or unassembled form. End items, assemblies, parts, attachments, or accessories for use in or on guided missiles are classified in classes other than this class.
4 suppliers registered
Includes: Structural Components; Components and Accessories Specially Designed for use on or with guided missiles, including Complete Gyro Mechanisms, Hydraulic Pumps, Automatic Pilot Mechanisms and Specially Designed Assemblies, and Electronic Guidance Equipment installed in missiles
Excludes: Electronic Remote Guidance Equipment used to guide missiles; Solid and Liquid Propellant Units; Components of Gyro Mechanisms.
51 suppliers registered
Excludes: Guided Missile Subsystems.
Notes: This class includes only complete guided missile systems. Anything less than a complete system, such as individual end items, assemblies, parts, attachments, or accessories for use in guided missile systems are classified in classes other than this class.
5 suppliers registered
Excludes: Complete Guided Missile Systems.
Notes: This class includes only combinations or assemblies of two or more end items, each of which is properly classified in other classes of this group, identified as single items of supply. Excluded from this class are individual end items, assemblies, subassemblies, attachments, accessories or parts classified in other cases of this group, not combined as single items of supply.
23 suppliers registered
Includes: Specially Designed Components of Guided Missile Remote Control Systems.
Excludes: Guided Missile Internal (Built-in) Control Systems; Components used in both guided missiles and other than guided missiles (including fire control components).
Notes: This class includes airborne and nonairborne guided missile remote control systems, components, and accessories, designed specifically for use therewith. Excluded from this class are fire control assemblies, subassemblies, and components modified for use with guided missile remote control systems, and fire control assemblies designed specifically for shipboard use
4 suppliers registered
Includes: Airborne and Nonairborne Guided Missile Launchers.
Excludes: Aircraft Launchers; Rocket Launchers.
Notes:
9 suppliers registered
Includes: Specially Designed Trucks and Trailers for use in transporting guided missiles; Specially Designed Slings, Hoists, Jacks, and Blowers; Self-propelled Vehicles and Trailers, Specially Designed for Guided Missile Handling or Servicing; Covers, Guided Missile; Conditioning Kits and Sets, Controlled Environment.
Excludes: Guided Missile Launchers (FSC 1440); Aircraft Handling and Servicing Equipment (FSC 1730).
12 suppliers registered
Notes: This class includes only complete aircraft. End items, assemblies, parts, attachments, or accessories for use in or on fixed wing aircraft are classified in classes other than this class.
27 suppliers registered
Includes: Helicopters.
Notes: This class includes only complete aircraft. End items, assemblies, parts, attachments, or accessories for use in or on rotary wing aircraft are classified in classes other than this class.
29 suppliers registered
Includes: Motorized Gliders.
Notes: This class includes only complete gliders. End items, assemblies, parts, attachments, or accessories for use in or on gliders are classified in classes other than this class.
2 suppliers registered
Includes: Drones specifically designed for such uses as targets, training, surveillance, missile evaluation, and photographic reconnaissance.
Excludes: Piloted aircraft and guided missiles converted to drone use.
Notes: This class includes only complete drones. End items, assemblies, parts, attachments, or accessories for use in or on drones are classified in classes other than this class.
9 suppliers registered
Includes: Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.
Excludes: Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.
Notes: This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.
46 suppliers registered
Includes: Aircraft Propellers; Propeller Blades, Cams, Cones, Hubs, Nuts, and Spinners; Test Clubs; Synchronizers; Power Control Units; Integral Oil Control Measures and Propeller Governors.
Excludes: Rotary Rudder and Rotary Wing Blades (FSC 1615).
17 suppliers registered
Includes: Helicopter dynamic components and specially designed parts that transmit power from the aircraft power plant to the rotary wing and rotary rudder. Also included in this class are Rotors; Blades; Rotor Blade, Trim, Tabs; Blade Sets; Yokes; Clutches and Transmissions
Excludes: Propellers (FSC 1610); Rotor Brake Systems Components (FSC 1630); Rotor Blade Hydraulic Folding System Components (FSC 1650); Hydraulic Servo System Components (FSC 1650).
Notes: This class includes miscellaneous component parts specifically designed for, and used exclusively in, helicopter drive mechanisms and rotor blades when not specifically classified elsewhere in the FSC indexes.
20 suppliers registered
Includes: Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.
Excludes: Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).
50 suppliers registered
Includes: Skis; Floats; Tracks; Landing Wheel Skid Detectors; Valves specifically designed for use with hydraulic or pneumatic wheel and brake systems; Helicopter Rotor Brake System Components.
Excludes: Landing Gear Axles (FSC 1620).
23 suppliers registered
Includes: Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.
Excludes: Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating, ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338), Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620)
Notes: This class includes only those components specifically designed for aircraft use.
42 suppliers registered
Includes: Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen System; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duck Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.
Excludes: Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.
Notes: This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.
29 suppliers registered
Excludes: Fitting Assemblies built into the aircraft structure.
Notes: Includes specifically designed items, sets, and systems for air-to-air, air-to-surface, and surface-to-air delivery, pick up, and recovery operations, unless parts, attachments, assemblies, for use in or on such systems (i.e., space vehicle aerial recovery systems) are specifically indexed to other classes of the FSC (i.e., Transmitting Radio Buoys and Direction Finding Subsystem Components).
14 suppliers registered
Includes: Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports; Electric Windshield Wipers; Aircraft Onboard Inert Gas Generators; Aircraft Furniture; Aircraft Mounted Winches and Hoists; In-Flight Refueling System Components, including Fuel Components; Aircraft Curtains; Cable Tension Regulators; Sun Visors; Rear-View Mirrors; Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.
Excludes: Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.
184 suppliers registered
Notes: Excluded from this Group are trucks, trailers, and servicing equipment specially designed for guided missile or atomic ordnance use
Includes: Aircraft Arresting Barriers.
Excludes: Airport Runway Marker Lights (FSC 6220).
18 suppliers registered
Includes: Catapults.
Excludes: Guided Missile Launchers (FSC 1440) and Space Vehicle Launchers (FSC 1840).
6 suppliers registered
Includes: Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers
Excludes: Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660)
Notes: This class excludes "vehicular components" such as those listed under FSC´s 2520, 2530, 2540, 2590.
90 suppliers registered
Includes: Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies; Trailers: Afterburner, Engine, Propeller, Fuselage, and Wing; Trucks, Aircraft Fuselage and Aircraft Wing; Skids, Engine Transport; Stands, Engine Transport; Bomb Trailers, Airfield; Trucks, Crashed Aircraft Removing.
Excludes: Airfield Specialized Lift Trucks (FSC 3930), and Trailers (FSC 2330); Highway Type Trucks (FSC 2320), and Trailers (FSC 2330); Cargo Loading and Unloading Trailers (FSC 2330) and Trucks (FSC 2320).
Notes: This class excludes "vehicular components" such as those listed under FSC´s 2520, 2530, and 2590.
35 suppliers registered
Notes: This class includes only complete space vehicles, whether in assembled or unassembled form.
3 suppliers registered
Includes: Structural Components; Components and Accessories specially designed for installation in or on Space Vehicles; Internal (Built-in) Control Systems.
Excludes: Remote Guidance Equipment.
47 suppliers registered
Includes: Specifically designed Components of Space Vehicle Remote Control Systems.
Excludes: Internal (Built-in) Control Systems; Components designed for use with both Guided Missile and Space Vehicle Systems.
7 suppliers registered
Includes: Launchers specifically designed for Space Vehicles.
Excludes: Launchers used with both Guided Missiles and Space Vehicles.
1 suppliers registered
Includes: Specially designed Trucks and Trailers for use in transporting Space Vehicles; Specially designed Slings, Hoists, Jacks, and Blowers, Self-propelled Vehicles, specially designed for space vehicle handling or servicing; Covers, space vehicle
Excludes: Equipment used in handling or servicing both Guided Missile and Space Vehicles.
Notes: This class does not include space vehicle aerial recovery system which are classified in Class 1670.
5 suppliers registered
Includes: Food and Water Production Equipment; Air Production Equipment; Shelter Equipment; Power Generation and Conversion Equipment.
Excludes: Items which are integral components of Space Vehicles.
2 suppliers registered
Notes: Only complete ships, small craft, floating docks, floating dry docks, and dredges (with or without hull) are classified in this group. End items, assemblies, parts, attachments or accessories for use in or on the above are classified in Group 20-Ship and Marine Equipment, unless other classes (outside of Group 19) are applicable.
Includes: Aircraft Carriers; Battleships; Cruisers; Destroyers; Submarines; Frigates and Corvettes; Gunboats; Motor Torpedo Boats; Subchasers; Landing Barges; Minelaying and Mine Sweeping Craft.
36 suppliers registered
37 suppliers registered
22 suppliers registered
27 suppliers registered
Includes: Tugs; Towboats; Fire Boats; Ice Breakers; Repair Ships; Tender Vessels (Buoy, Lighthouse, Destroyer); Lightships; Cable Ships; Salvage and Submarine Rescue Vessels.
Excludes: Combat Vessels; Dredges.
36 suppliers registered
Includes: Aircraft Lighters, Car Floats, and other Transportation Barges, Depot Barges; Scows.
15 suppliers registered
Includes: Derrick, Piledriver, and Rock Cutter Barges; Barrage Balloon, Catapult Lighter, and Torpedo Testing Barges; Concrete Mixing Plant, Mechanical Bank Grader, and other Bank Revetment Barges; Fire, Smudge Removal, and other Pump Barges; Houseboats, except Yacht Type; Power Plant Barges; Refrigeration Barges; Barge Mounted Cranes, Flexible Towed Barges.
Excludes: Combat Landing Barges.
13 suppliers registered
Includes: Powered and Unpowered Small Craft; Lifesaving Boats; Airplane Crash Boats; Reconnaissance Boats; Yachts; Pneumatic Boats.
Excludes: Fishing Craft; Life Rafts, including Pneumatic; Bridge Floats and Pontoons.
50 suppliers registered
Includes: Camels; Pontoon Stanchions; Pontoon Ramps.
Excludes: Floating Drydocks; Bridge Floats and Pontoons; Pontoon Hardware (Jewelry).
19 suppliers registered
5 suppliers registered
Includes: Dredges, without Hull; Ocean-Going Dredges; Floating Dredges.
9 suppliers registered
Includes: Commercial Sailing Vessels.
40 suppliers registered
Includes: Propulsion Shafts; Ship Proppellers. Marine Transmissions, Reverse and Reduction Gear Type.
Excludes: Engines (FSC 2810, 2815); Turbines (FSC 2825, 2835, 2840).
76 suppliers registered
Includes: Masts; Kingposts; Sail Booms; Shipborne Booms not attached to Cranes and Derricks.
Excludes: Tackle Blocks.
34 suppliers registered
Includes: Steering Gears and Controls; Boat Davits.
43 suppliers registered
Includes: Anchors; Grapnels; Sea Anchors; Watertight Doors; Ship Ventilators; Hatches; Manholes; Scuttles; Air Ports; Fenders; Sea Chests; Scuppers; Rudders; Stern Tubes; Chain Pipes; Hawse Pipes; Boiler Uptakes and Stacks; Chocks; Mast and Boom Fittings; Oars; Paddles; Oarlocks.
65 suppliers registered
28 suppliers registered
Excludes: Fishing Vessels.
12 suppliers registered
Includes: Sails; Chain Ladders; Rope Ladders; Marine Furniture.
309 suppliers registered
Excludes: Self-Propelled Cars.
Notes: This class includes only complete locomotives and tenders. End items, assemblies, parts, attachments, or accessories for use in or on locomotives and tenders are classified in classes other than this class.
5 suppliers registered
Includes: Trailed Cars; Self-Propelled Cars.
Excludes: Aerial Tramway Cars.
Notes: This class includes only complete rail cars. End items, assemblies, parts, attachments, or accessories for use in or on rail cars are classified in classes other than this class.
5 suppliers registered
Includes: Rail Laying, Joining and Shifting Equipment; Self-propelled and Car Mounted Cranes.
Excludes: Hand Tools (FSG 51).
22 suppliers registered
Includes: Brake Beams and Components; Couplers; Trucks and Components; Journals and Components; Wheel Sets and Components.
Excludes: Railroad Furniture (FSG 71).
73 suppliers registered
Includes: Railroad Rails; Railroad Tie Plates; Railroad Turnouts and Components; Railroad Spikes.
Excludes: Ballast (FSC 5610); Railroad Ties (FSC 5510).
15 suppliers registered
25 suppliers registered
Includes: Cars, Motor, Highway; Busses; Chassis, Passenger Motor Vehicle; Hearses; Ambulances.
Excludes: Amphibious Personnel Carriers; All Truck Chassis.
Notes: This class includes only complete passenger motor vehicles, and chassic therefor. Any end items, assemblies, parts, attachments, or accessories, other than complete chassis, for use in or on passenger motor vehicles are classified in classes other than this class.
19 suppliers registered
Includes: Panel, Delivery and Pick Up Trucks, Tactical and Administrative Military Cargo Carrying Vehicles, including Wheel Mounted Amphibian Vehicles; Truck Tractors and Trailer Combinations; Armored Cars.
Excludes: Fire Trucks; Special Construction Type Earth and Rock Hauling Trucks; Motorized Air Compressors; Motorized Concrete Mixers; Construction Specialized Machinery Generally; Specially designed trucks for use in and around airfields, hangers, and warehouses; Tracked and Halftracked Vehicles.
Notes: This class includes only complete wheel mounted trucks and truck tractors, and chassis therefor. Any end items, assemblies, parts, attachments, or accessories other than complete chassis, for use in or on such trucks or truck tractors are classified in classes other than this class. The combined chassis and body of a special purpose truck, such as a machine shop, mobile laundry, or dental laboratory, is classified in this class. The complete mobile unit, consisting of chassis, body, and additional equipment, as in an equipped truck mounted machine shop, is excluded from this class.
38 suppliers registered
Includes: Semitrailers; Semitrailer Dollies; Cargo Trailers; Passenger and House Trailers; Special Purpose Trailers, such as Ammunition.
Excludes: Fire Fighting Trailers; Specially designed trailers for use in and around airfields, hangers, and warehouses.
Notes: This class includes only complete trailers, and chassis therefor. Any end items, assemblies, parts, attachments, or accessories, other than complete chassis, for use in or on trailers are classified in classes other than this class. The combined chassis and body of a special purpose trailer, such as a machine shop, mobile laundry, or dental laboratory, is classified in this class. The complete mobile unit, consisting of chassis, body, and additional equipment, as in an equipped trailermounted machine shop, is excluded from this class.
49 suppliers registered
Includes: Sidecars; Tricycles.
Excludes: Children´s Wheeled Goods.
Notes: This class includes only complete motorcycles, complete motor scooters, and complete bicycles. End items, assemblies, parts, attachments, or accessories for use in or on motorcycles, motor scooters, or bicycles are classified in classes other than this class.
10 suppliers registered
Includes: Tanks and Tracked Self-Propelled Weapons and Vehicles with or without amphibian capabilities; Armored Halftracks; Self-Propelled Sleds; and Self-Propelled Flame Throwers.
Excludes: Wheel Mounted Vehicles.
Notes: This class includes only complete combat, assault, and tactical tracked vehicles, and chassis. Any end items, assemblies, parts, attachments, or accessories, other than complete chassis, for use in or on such vehicles are classified in classes other than this class.
22 suppliers registered
Notes: This group includes only complete tractors and tractor chassis. Assemblies, subassemblies, parts, attachments or accessories are excluded from this group.
Excludes: High Speed Tractors (FSC 2430); Armored Dozer-Scrapper Combination Tractors (FSC 2350).
Notes: This class includes only complete low speed, full track tractors, and chassis. Any end items, assemblies, parts, attachments, or accessories, other than complete chassis, for use in or on low speed, full track tractors, are classified in classes other than this class.
11 suppliers registered
Includes: Agricultural Tractors; High Speed Tractors; Industrial Tractors.
Excludes: Aircraft Towing Tractors and Crashed Aircraft Moving Tractors (FSC 1740); Aircraft Towing-Power Servicing Tractors (FSC 1730); Warehouse Tractors (FCS 3930).
Notes: This class includes only complete wheeled tractors, and chassis. Any end items, assemblies, parts, attachments, or accessories, other than complete chassis, for use in or on wheeled tractors, are classified in classes other than this class
23 suppliers registered
Excludes: Low Speed Tractor (FSC 2410); Armored Dozer-Scraper Combination Tractors (FSC 2350).
Notes: This class includes only complete high speed track laying tractors, and chassis. Any end items, assemblies, parts, attachments, or accessories, other than complete chassis, for use in or on high speed track laying tractors, are classified in classes other than this class.
9 suppliers registered
Notes: The term "vehicular" as delimited for group 25, is applicable to those vehicles and tractors included in groups 23 and 24, construction vehicles included in group 38, and warehouse trucks, tractors, and trailers included in group 39. It does not apply to railway vehicles (group 22), aircraft (group 15), or watercraft (group 19). An Item of supply which is a "vehicular" component, within the scope delimited above, is classified in this group regardless of whether it has additional applications on vehicles outside the delimitations for this group.
Includes: Leaf Type Vehicular Springs; Suspension Type Shock Absorbers.
Excludes: Vehicular Hardware (FSG 53); Specialized Vehicular Furniture (FSC 2540).
45 suppliers registered
Includes: Transfer Transmission Assemblies; Clutch Assemblies; Universal Joints; Propeller Shafts; Automotive Torque Converters; Power Takeoffs.
49 suppliers registered
Includes: Turrent Brakes; Clutch Brakes, Tank Turret.
41 suppliers registered
Includes: Automobile Seat Covers; Shock Absorbers; Bumpers; Windshield Wipers; Bumper Guards; Mirrors, Rear View and Side View; Vehicle Heaters.
Excludes: Speedometers (FSC 6680); Suspension Type Shock Absorbers (FSC 2510).
42 suppliers registered
Includes: Includes: Accessory Kits and Boxes, Parts Kits, and individual components used in the repair and/or modification of Weapons System type Vehicles such as Tanks, Personnel Carriers, Mobile Howitzers, and the like.
Excludes: Excludes: Items used in the repair and/or modifications of Commercial Type Vehicles (FSC 2540), vehicular type light fixtures (FSC 6220), and electronic switches, parts kits, and modification kits (FSG 59).
20 suppliers registered
Includes: Attachments for Tanks, Self-propelled Weapons, and High Speed Tractors; A-frames and Winches specifically designed for truck mounting; Cranes and Crane Booms for Wrecker Trucks.
139 suppliers registered
Excludes: Aircraft Pneumatic Tyres and Tubes.
7 suppliers registered
4 suppliers registered
Includes: Rubber Track Laying Treads.
10 suppliers registered
Includes: Tread Gum; Cold Patches; Friction Cord Fabric; Vulcanizing Patches; Padding Stock; Quick-Cure Gum; Tyre and Tube Repair Kits; Camelback; Valves; Valve Cores.
Excludes: Vulcanizing Machinery and Equipment.
7 suppliers registered
Includes: Gas Reciprocating Engines; All Gasoline Reciprocating Engines except Aircraft Prime Moving.
Excludes: Engine Accessories (FSC 2990).
13 suppliers registered
Includes: Complete Engine Assemblies; Piston Rings; Cylinders; Pistons; Camshafts; Crankshafts.
Excludes: Fuel System Components (Carburetors; Carburetor Floats; Fuel Pumps; Fuel Controls; Fuel Valves) (FSC 2915); Electrical System Components (Spark Plug Adapters; Ignition Distributors; Ignition Coils, Electrical Starters) (FSC 2925); Engine CoolingSystem Components (Engine Oil Coolers; Cooling Radiators) (FSC 2935); Engine Air/Oil Clearing/Filters/Strainers (FSC 2945; Miscellaneous Engine Accessories (Pneumatic Starters, Cowling Mounts, Control Assemblies) (FSC 2995).
Notes: Note Engines and components classified in this FSC must be desinged specifically for use as/on an aircraft prime mover. Auxiliary engines and their components will be classified in the appropriate FSC elsewhere in FSG 28.
12 suppliers registered
Includes: Automotive, Industrial, Marine, Locomotive, and all other types of Diesel and Semi-Diesel Engines.
Excludes: Engines Accessories (FSC 2990).
61 suppliers registered
11 suppliers registered
Includes: Mercury Vapor Turbines.
17 suppliers registered
10 suppliers registered
Includes: Airflow Deflectors; Combustion Chambers, Compressors, Turbines, Accessory Gear Boxes and their Components.
Excludes: Components for Gas Turbines and Jet Engines, Aircraft Prime Mover (FSC 2840); Engine Fuel Systems (FSC 2910); Engine Electrical Systems (FSC 2920); Engine Cooling Systems (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940)
Notes: Note Engines and Components classified in this FSC are primarily for use on non-aircraft prime mover (e.g., Naval ship applications), aircraft non-prime mover (e.g., airframe mounted auxiliary power units), and for aircraft ground support equipment (e.g..start carts).
29 suppliers registered
Includes: Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.
Excludes: Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).
Notes: Note Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.
37 suppliers registered
Includes: Rocket Prime Movers, Liquid Type, including Liquid Jet Assisted Take Off (JATO) Units, for use in aircraft, rockets, and guided missiles; Liquid Propellants encased in consumable containers, intended for insertion into missile propulsion systems as integral parts.
Excludes: Rocket Motors - Solid Propellant Units (FSC 1337); Liquid Propellants predetermined to specific quantity and quality, but packaged in reusable containers; Solid Propellant Squibs and Cartridges, whether intended for insertion into Liquid Propellent Systems or not (FSC 1337).
10 suppliers registered
14 suppliers registered
Includes: Wind and Compressed Air Engines.
75 suppliers registered
Notes: Unless specifically excluded, engine accessories for all vehicles, such as aircraft, motor vehicles, ships, tractors, and construction vehicles, as well as accessories for stationary engines, are classified in this Group.
Includes: Carburetors; Fuel Pumps; Engine Fuel Filters; Fuel Tanks; Components for all engines except Aircraft and Guided Missile Prime Moving.
36 suppliers registered
Includes: Carburetors; Fuel Pumps; Engine Fuel Filters; Fuel Controls, Jet Engine; Fuel Primers; Water Injection Controls and Valves; Fuel Valves Fuel Flow Regulators; Components of Smoke Abatement Systems.
Excludes: Aircraft Fuel Tanks (FSC 1560); In-flight Refueling System Fuel Components (FSC 1680). Fuel System Components not specifically designed for use with Aircraft Engines or Missile Prime-movers.
Notes: Note Fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this FSC.
33 suppliers registered
Includes: Generators; Magnetos; Spark Plugs; Ignition Coils; Ignition Distributors; Engine Voltage Regulators; Ignition Harness Assemblies; Starting Motors for Engines.
Excludes: Vehicular Lighting Fixtures (FSC 6220) and Aircraft Generators (FSC 2925).
28 suppliers registered
Includes: Magnetos; Igniters (Spark Plugs); Ignition Coils; Ignition Distributors; Engine Voltage Regulators; Ignition Harness Assemblies; Starting Motors for Engines; Engine Accessory Generators.
Excludes: Aircraft Lighting Fixtures (FSC 6220); Auxiliary Aircraft Generators (FSC 6115).
Notes: Note Items designed for specific use on aircraft and guided missile prime movers are to be placed in this FSC.
17 suppliers registered
Includes: Cooling Fans; Radiators; Water Pumps; Water Hose Assemblies; Engine Coolant Filters; Components for all Engines except Aircraft and Guided Missile Prime Moving.
38 suppliers registered
Includes: Radiators; Cooling System Pumps; Water Hose Assemblies; Lubricating Oil Coolers and Control Valves; Oil Temperature Regulators.
Excludes: Cooling System Components not specifically designed for use with Aircraft Engines.
Notes: Note This class includes only cooling system components for aircraft and/or guided missile prime movers only.
15 suppliers registered
Includes: Components for all Engines except Aircraft and Guided Missile Prime Moving.
Excludes: Air and Oil Filters (FSC 4310, 4330), Strainers (FSC 4730) and Cleaners (FSC 4310) not specifically designed for use with engines.
29 suppliers registered
Includes: Air Filters; Oil Filters; Strainers; Cleaners.
Excludes: Fuel Filters (FSC 2915); Items designed for other than Engines.
Notes: Note Items placed in this FSC should be specifically designed for use on aircraft or guided missile prime movers only.
11 suppliers registered
Includes: Turbosupercharged Regulators; Engine Turbosuperchargers.
Excludes: Engine Integrated Superchargers (FSG 28).
Notes: Note All turbosuperchargers and their components not elsewhere classifiable will be classified in this FSC.
21 suppliers registered
Includes: Engine Dynafocal Suspension Mounts; Engine Driven Superchargers (not integrated with engine); Starter Cranks; Engine Starter Ropes; Exhaust Mufflers; Hand Inertia Starters; Air Duck Heaters; Engine Governors; Intake Mufflers; Combustion Type Starters; Miscellaneous Accessories for all Engines except Aircraft and Guided Missile Prime Moving.
Excludes: Electrical Starters Non-Aircraft (FSC 2920); Aircraft (FSC 2925).
75 suppliers registered
Includes: Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.
Excludes: Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).
Notes: Note Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.
57 suppliers registered
Includes: Fluid Couplings; Nonvehicular Clutches and Couplings; Horizontal Right Angle Drive Gear Units.
Excludes: Automotive Torque Converters (FSC 2520); Vehicular Power Transmission Components (FSC 2520); Rotary Aircraft Transmission Gear Units (FSC 1615).
21 suppliers registered
Includes: Power Transmission Chain; Matched Gear Sets.
Excludes: Reduction Gears (FSC 3010).
29 suppliers registered
Includes: Belt Lacings; Belt Pins.
20 suppliers registered
Includes: Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.
75 suppliers registered
Notes: All bearings, including specially designed, lubricated, and/or selected, are to be classified in the appropriate classes of this group. Bearings are parts that supports another part which rotates, slides, or oscillates in or on it.
Includes: Ball Bearings; Roller Bearings; Balls; Races.
Excludes: Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)
Notes: Note This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
22 suppliers registered
Includes: Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.
Excludes: Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).
Notes: Note Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.
28 suppliers registered
Includes: Pillow Block Units; Cartridge Units; Flange Units; Takeup Units; Hanger Box Units; Flat Box Units; Step Box Units.
Excludes: Antifriction Bearings (FSC 3110); Plain Unmounted Bearings (FSC 3120).
Notes: Note This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
22 suppliers registered
3 suppliers registered
Includes: Mortisers; Tenoners; Veneer Lathes.
Excludes: Hand Held Power Driven Tools; Hand Held Tools Operated by Flexible Shaft.
10 suppliers registered
Includes: Circular and Band Saw Blades; Cutter Heads; Jointer and Notcher Heads; Cutters.
Excludes: Head Turning Tools.
15 suppliers registered
Includes: Cutoff Machines; Saw Blade Dressing Machines; Retoothing Machines.
23 suppliers registered
Notes: The following definitions apply to "Machining Centers" and "Way-type Machines". a. "Machining Center", refers to a multipurpose numerically controlled machine tool for the complete and automatic machining of parts requiring multiple operations such as milling, drilling, tapping, boring, and reaming, having an integral tool storage device and an integral means for positioning various faces of the work piece. It must have facilities for automatic interchanging of varied cutting tools between successive operations. Excluded from this class are multipurpose numerically controlled machine tools, such as Boring-Drilling-Milling Machines, which require the use of an attachment or accessory for toll storage and/or to position the various faces of a work piece. These types of equipment are classified in other appropriate classes within group 34. b."Way-type Machine", refers to a speical machine tool of station type design consisting of individually mounted self-contained machining units and facilities for indexing the work piece to each station in a predetermined sequence. The machining unit(s) may be disassembled andd rearranged to accommodate different work piece configurations. Machine is capable of performing single or multiple operations on the work piece simultaneously or in sequence to each station.
13 suppliers registered
Includes: Electrical Discharge Machines; Electrolytic Grinding Machines.
2 suppliers registered
11 suppliers registered
6 suppliers registered
Includes: Multiple Spindle Drilling-Tapping Machines.
Excludes: Way-Type Machines.
28 suppliers registered
6 suppliers registered
Excludes: Electrolytic Grinding Machines.
23 suppliers registered
Includes: Screw Machines
Excludes: Speed Lathes; Metal Spinning Lathes; Cartridge Case and Shell Lathes.
22 suppliers registered
22 suppliers registered
Includes: Combination Shaper-Planers.
Excludes: Gear Shapers; Planer Type Milling Machines.
9 suppliers registered
Includes: Gun Rifling Machines; Speed Lathes.
25 suppliers registered
3 suppliers registered
Includes: Hardening, Annealing, Tempering, Normalizing, Cyaniding, and Carburizing Equipment; Furnaces, Flue Welding, Non-Thermal Stress Relieving Systems.
14 suppliers registered
Includes: Galvanizing, Tinning, Oiling, Pickling; Electroplating, and Anodizing Equipment.
25 suppliers registered
Includes: Gas Shielded Arc Welding Machines; Arc Bonding Machines; Semi-Automatic and Automatic Arc Welding Machines.
Excludes: Welding Supplies, and Associated Equipment such as: Flux Recovery Mchines; Flux Dispensers; Tacker Panels; Welding Panels.
22 suppliers registered
Includes: Electric Resistance Brazing Machines; Band Saw Brazers; Stored Energy Resistance Welding Machines.
Excludes: Electric Induction Brazing and Soldering Machines.
9 suppliers registered
Includes: Metal Spray Guns; Arc Cutting Machines; Torches and Tips; Gas Brazing Machines; Flame Cutting Machines; Vacuum Metalizers; Spark Discharge Metalizers.
Excludes: Welding Supplies; Disintegrating Machines.
24 suppliers registered
Includes: Welding Tables.
11 suppliers registered
Includes: Thermite Welding Equipment; Flux Recovery Machines; Flux Dispensers; Arc Converters; Welding Panels.
28 suppliers registered
Includes: Soldering Irons; Welding Electrodes and Rods; Brazing Fluxes; Soldering Fluxes; Solder.
23 suppliers registered
Excludes: Wire and Metal Ribbon Forming Machines.
27 suppliers registered
Includes: Metal Powder Compacting Presses.
30 suppliers registered
Includes: Metal Powder Compacting Presses.
16 suppliers registered
Includes: Arbor, Straightening, Forcing, and Assembly Presses.
21 suppliers registered
22 suppliers registered
Excludes: Forging Presses.
5 suppliers registered
Excludes: Roll Forming Machines.
3 suppliers registered
Excludes: Power Driven Hand Riveting Machines.
6 suppliers registered
Includes: Metal Spinning Lathes.
17 suppliers registered
Includes: Portable Abrasive Cutting Machines; Portable Drilling Machines; Portable Slotters and Shapers.
Excludes: Stationary Type Machine Tools mounted on portable devices such as wheel or leg type stands.
23 suppliers registered
Includes: Broaches; Files; Milling Cutters; Reamers; Saws.
Excludes: Flame Cutting Tools.
23 suppliers registered
17 suppliers registered
Excludes: Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.
27 suppliers registered
Excludes: Parts Feeders.
10 suppliers registered
Notes: This class includes jigs, fixtures, and templates used in conjection with the metalworking machinery classified in Group 34. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in Group 49.
13 suppliers registered
14 suppliers registered
Includes: Washing Machines; Extractors; Wringers; Drying Tumblers; Ironers; Presses; Starching Machines; Marking Equipment; Mobile Laundry and Dry Cleaning Units.
7 suppliers registered
Includes: Shoe Sewing Machines; Mobile Shoe Repair Shops.
1 suppliers registered
Excludes: Shoe Sewing Machines.
5 suppliers registered
Includes: Filling Machines; Container Capping Machines; Label Applying Machines; Package Sealing Machines; Paperboard Box, Case and Tray Making Machines; Strapping Machines; Stapling Machines, except Office Type.
Excludes: Paperboard Manufacturing Machinery.
7 suppliers registered
Includes: Fare Recording Devices; Parking Meters; Turnstiles; Coin Operated Phonographs.
Excludes: Coin and Currency Handling Machines; Coin Operated Scales.
4 suppliers registered
Includes: Manicure Tables.
19 suppliers registered
Includes: Industrial Food Products Equipment.
Excludes: Kitchen and Galley Equipment.
15 suppliers registered
Includes: Offset Presses; Typesetting Machinery; Bookbinding Machinery; Photoengraving Machinery; Printing Type; Rules; Leads; Slugs; Line Gages; Quoins; Plate Hooks; Gelatine Process Machines; Spirit Process Machines; Stencil Process Machines; Offset Process Machines; Photostat Machines; Blueprint Printing and Developing Machines; Print Shop Furniture.
Excludes: Microfilm Machines.
7 suppliers registered
Excludes: Marking Machines, Laundry; Printing Machine, Label; Printing Press, Label; Embossing Machines, Office Type; and Marking Machines, Office Type.
Notes: Marking machines which make permanent indentations in metal are classified in Group 34.
10 suppliers registered
Includes: Chippers; Digestors; Beaters; Bleaching Equipment; Paperboard Manufacturing Machinery.
Excludes: Paperboard Box, Case and Tray Making Machines.
4 suppliers registered
Includes: Plasticators; Presses; Synthetic Rubber Working Machinery; Thread Extruding Machinery; Vulcanizing Machinery.
Excludes: Protective Covering Laminating Presses; Tire Maintenance and Repair Equipment.
7 suppliers registered
Includes: Cotton Ginning Machinery; Looms; Button Covering Machines; Rope Laying Machines; Lace Machines.
5 suppliers registered
Includes: Brickmaking Machinery.
3 suppliers registered
Includes: Optical Goods Manufacturing Machinery.
Excludes: Ophthalmic Lens Cutting, Drilling, Edging, and Grinding Machines; Specialized Semiconductor, Microcircuit, and Printed Circuit Board Manufacturing Machinery.
3 suppliers registered
3 suppliers registered
3 suppliers registered
Includes: Crushers and Mills for Chemical Materials; Pharmaceutical Briquetting and Tabletting Presses; Chemical Explosive Manufacturing Machinery.
Excludes: Construction Materials Crushers, Mills and Pulverizers; Plastic Products Manufacturing Machinery; Pharmaceutical Products Wrapping and Packaging Machinery; Laboratory and Shop Type Mills and Mixers.
4 suppliers registered
Excludes: Meteorological Equipment.
Notes: Included in this class are gaseous dispensing systems, both mobile and installed. Includes liquefied gaseous storage tanks, mounted on a common base with, or integral to, gas generating equipment included in this class. Also includes those liquefied gaseous storage tanks, either trailer mounted or skid mounted, used to store liquefied gaseous products until needed. Excluded from this class are those storage tanks designed to be used as an integral part of guided missile propellant servicing trailers, rocket power plants or test stations, and aircraft oxygen converters which are classified as specified by the indexes and structure of the FSC.
11 suppliers registered
Excludes: Chemical Products and Construction and Mining Type Crushing, Pulverizing, Screening and Mixing Machinery; Maintenance and Repair Shop Type Mixers.
Notes: This class includes general use machinery related to two or more manufacturing industries.
4 suppliers registered
Includes: Substrate Preparation Equipment; Circuit Pattern Forming Equipment; Interconnecting and Packaging Equipment.
Excludes: Assembly Machines for Mounting Discrete Components on Printed Wiring Boards.
Notes: This class includes, and is restricted to, equipment specifically designed for manufacturing semiconductor devices (FSC 5961), microcircuits (FSC 5962), and printed circuit boards (FSC 5998). Excludes items for which more suitable classes are specifically prescribed by the indexes and structure of the FSC.
5 suppliers registered
Includes: Molding Machines; Tumbling Mills, Foundry Dextrine; Core Paste.
Excludes: Crucible Furnaces; Cupola Furnaces; Foundry Hand Tools.
18 suppliers registered
Includes: Drum and Jerrican Manufacturing Machinery; Specially Designed Container Leak Testing Machines; Can Making Machinery.
Notes: This class includes only those machines specifically designed for manufacturing metal containers. Closing machines designed to seam the tops of filled containers will be classified in Class 3540.
7 suppliers registered
Includes: Ammunition and Explosive Loading (Filling and Assembling) Specialized Machinery; Small Arms Ammunition Manufacturing Machinery; Artillery and Anti-Aircraft Shell Manufacturing Machinery.
Excludes: Ammunition and Weapons Maintenance and Repair Shop Specialized Equipment; Nonspecialized or Standard Machinery not designed exclusively for manufacturing or assembling ammunition and ordnance equipment.
15 suppliers registered
Includes: Industrial Production Type Power Screwdriving Machines; Circuit Card Assembly Machines.
Excludes: Specialized Ammunition and Ordnance Assembly Machines; Wrapping and Packaging Machinery; Metalworking Machinery; Hand Tools.
Notes: This class includes equipment specifically designed to assemble prefabricated components without further design machining of the components. Equipment designed to perform combined machining and assembling operations which result in material removal are classified in classes other than this class. Also excluded are items for which more specific classifications are suitable.
5 suppliers registered
Includes: Laminar and Nonlaminar Flow Enclosures; Dust Controlled Facilities; Air Showers.
14 suppliers registered
Includes: Communication Wire Dispenser Fabricating Machinery; Specialized Logging Equipment; Petroleum Refinery Machinery; Shoemaking Machinery; Production Type Impregnating Equipment.
Excludes: Opthalmic Lens Cutting and Grinding Machinery; Clothing Impregnating Equipment.
51 suppliers registered
Includes: Harrows; Plows; Seed Drills; Seeder Attachments; Sprayers.
5 suppliers registered
Includes: Hayrakers; Mowers.
Excludes: Mower Attachments (FSC 3750); Sickle Bar Attachments (FSC 3750).
6 suppliers registered
6 suppliers registered
Includes: Atomizers; Delousing Outfits; Dusters; Fly Swatters; Flypaper; Fog Generators; Sprayers; Traps.
Excludes: Self Pressurized Spray Kits (FSC 4940).
8 suppliers registered
Includes: Garden Tractors, Walking Type; Lawn Mowers, Powered and Nonpowered; Hedge Trimers; Lawn Seeders; Fertilizer Spreaders; Gardening Rakes, Forks, Hoes, and Other Gardening Tools.
7 suppliers registered
Includes: Dog Harnesses; Leads.
2 suppliers registered
Includes: Scrapers; Ditchers; Loaders; Graders; Special Construction Type Earth and Rock Hauling Trucks and Trailers; Special Individual Work and Power Sections of Construction Equipment with a quick connect/disconnect capability. The Power Section is designed to be coupled with a work Section to form a functional piece of Construction Equipment.
Excludes: Standard Tractors (FSG 24); Trailers (FSC 2330); Trucks (FSC 2320).
12 suppliers registered
Includes: Cranes; Crane-Semitractors; Crane-Shovels; Crane-Tractors.
Excludes: Barge Mounted Cranes (FSC 1935); Locomotive Cranes (FSC 2230).
9 suppliers registered
Includes: Backhoes; Buckets; Dippers; Fairleads; Gantries; Grapples; Lifting Magnets; Shovels; Wrecking Balls.
7 suppliers registered
Includes: Augers; Crushers; Crushing, Screening, and Washing Plants and Units; Drilling Machines; Paving Breakers; Rock Drills.
Excludes: Tampers (FSC 3895).
14 suppliers registered
Includes: Pavement Scrubbing Machines; Snow Removal Units; Sweepers; Road Marking Machines; Vacuum Cleaners; Water Distributors; Weed Burners.
Excludes: Standard Tractors with Road Clearing or Cleaning Attachments (FSC 2410, 2420, 2430); Timber Sawing Equipment (FSC 5130, 5110).
6 suppliers registered
Includes: Angledozers; Augers; Backhoes; Bullclams; Bulldozer-Shovels; Cranes; Grubbers; Loaders; Rakes; Rippers; Rollers; Scarifiers; Snow Removal Units; Snowplows; Sweepers; Treedozers.
19 suppliers registered
Includes: Well Heads; Pumping Equipment; Gas Distribution Equipment.
5 suppliers registered
Includes: Asphalt Elevators; Asphalt Heaters; Asphalt Kettles; Asphalt Transfer Equipment; Batching Plants; Stabilizing and Compacting Equipment; Concrete Mixers (All Types); Concrete Vibrators; Bituminous and Concrete Pavers; Asphalt Distributors; Sheepfoot Rollers; Rooters; Rippers; Pile Drivers; Bitumen Heaters; Cable Laying, Lashing, Spinning and Reeling Equipment.
Excludes: Earth Moving and Excavating Equipment (FSC 3805 & 3810); Pile Driving Attachments for Cranes and Crane-Shovels (FSC 3815); Special Individual Work and Power Sections of Construction Equipment with a quick connect/disconnect capability (FSC 3805).
55 suppliers registered
Includes: Pneumatic Tube Systems; Portable, Stationary, Powered, and Nonpowered Conveyors; Conveyor Feeders.
46 suppliers registered
Includes: Dry Materials Feeders; Parts Feeders
Excludes: Aggregate and Fines Feeders; Conveyor Feeders; Water Purification Dry Chemical Feeders.
Notes: Materials Handling equipment included in this class is restricted to those materials feeders and parts feeders that serve as a conveying device, and by which the rate of delivery of bulk materials, packages, or objects may be controlled. Items included in this class are synchronized with companion machinery, feeding predetermined amounts, by volume, of specific materials accuratly and continuesly from storage bins or hoppers to process or mixing machines, and are interchangable between machines. Excluded from this class are conveyor feeders (i.e., apron, belt, chain, flight, pan, etc., adapted for feeder service) that are classifiable in Class 3910 and/or Class 3895, as appropriate.
13 suppliers registered
Includes: Dolly Trucks; Pushcarts; Handcarts; Wheelbarrows; Hand Trucks; Materials Handling Trailers.
Excludes: Conveyors.
64 suppliers registered
Includes: Tug Jockeys; Fork Lift Trucks; Platform Trucks; Straddle Trucks.
31 suppliers registered
Excludes: Load Chain; Chain and Metal Rope Fittings; Wire Rope; Hoists; Ship Rigging.
34 suppliers registered
Includes: Windlasses: Capstans: Ore Bridges: Gypsies: Warehouse Cranes: Wharf Cranes, Mobile or Fixed: Overhead Traveling Cranes.
Excludes: Crane-Shovels (FSC 3810); Barge Mounted Cranes (FSC 1935); Winches for Integral Mounting on Trucks or Tractors (FSC 3830); Locomotive Cranes (FSC 2230).
44 suppliers registered
8 suppliers registered
Includes: Skids; Pallets.
Excludes: Airfield Engine Transport Skids.
149 suppliers registered
Includes: Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.
Excludes: Power Transmission Chain (FSC 3020); Slings.
Notes: Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.
45 suppliers registered
Includes: Fibrous Cord Assemblies; Fibrous Cord; Fibrous Rope; Fibrous Twine.
Excludes: Wire Rope (FSC 4010); Slings (FSC 3940).
Notes: Fiber rope is classified in this class when it is bulk material or for general use. Items with attachments and/or terminations are identified in this class unless a more specific item name is used. a. Fiber rope is flexible twisted strands of manila, nylon or other fiber. b. Cordage is ropes or cords used in rigging (see item name definitions for parameters). c. Twine is two or more strands twisted together.
34 suppliers registered
Includes: Anchor Guys; Wire Stranded Bands; Wire Rope Clamps; Cargo Hooks; Shackles; Swivels; Rope Terminals; Rope Wedges.
Excludes: Clamp Blocks (FSC 5340); Support Hooks (FSC 5340).
Notes: Note All items, including specially designed, will be classified in this FSC. Fittings classified in this FSC are items used in conjunction with chain, rope, and are attached to perform certain functions, (e.g., hooks, shackles, and wedges) refer to item name definitions for parameters.
51 suppliers registered
Includes: Grocery Type Display Cases; Ice Cream Cabinets; Drinking Fountains (except Portable and stationary types classified in Class 4510); Professional and Scientific Refrigerators; Rivet Coolers; Photographic Refrigerators; Mortuary Refrigerators; Household and Commercial Refrigerators; Grocery Type Showcases; and other types of refrigeration equipment of the commissary or food store type.
Excludes: Cafeteria Type Refrigerated Display Cases; Soda Fountains; Milk, Soda, and/or Ice Cream Dispensers; Cold Food Counters; Carbonators; Combination Heated-Refrigerated Food Serving Equipment; Cafeteria Type Showcases; Chilling Equipment Used for display and Serving of Food (see Class 7310 for these items). Also excluded from this class are refrigeration components (see Class 4130)
Notes: This class includes only complete refrigeration equipment, whether refrigerated from an integral or remote mechanical refrigeration unit or system. Also included in this class are refrigeration plants, and complete "packaged" refrigeration units and systems containing a power driven compressor, condenser, evaporator, and all other necessary components to refrigerate an enclosed space. Nonoperating accessories such as ice trays, shelves, and panels are included in this class. Excluded from this class are operating components, assemblies, parts, attachments, or accessories, for use in or on complete refrigeration equipment, plants, systems, or the "packaged" refrigeration units, and which are to be classified in class 4130, or as otherwise specifically prescribed by the indexes and structure of the FSC.
50 suppliers registered
Includes: Store Type Units; Window and Room Type Units; Marine, and Vehicular Air Conditioning Units; Air Conditioning Plants and Systems.
Excludes: Air Conditioning Components (FSC 4130, or as otherwise specifically prescribed by the indexes and structure of the FSC).
Notes: This class includes only complete air conditioning equipment, systems, and plants. Also included are specially designed nonoperating accessories such as a window panel used with a window type air conditioning unit to facilitate mounting. Excluded from this class are operating components, assemblies, parts, attachments, or accessories for use in or on air conditioning equipment, which are to be classified in Class 4130, or as otherwise specifically prescribed by the indexes and structure of the FSC.
64 suppliers registered
Includes: Heat Exchanger Equipment; Refrigerant Strainers; Refrigeration Compressors; Air Conditioning and Refrigeration Servicing Equipment, such as Charging and testing manifolds, Lines and Units; Operating Components of Refrigeration and Air Conditions Equipment, Plants, and Systems classified in classes 4110 and 4120.
Excludes: Refrigeration and Air Conditioning Plants (see classes 4110 and 4120): Collections of Refrigeration Components "packaged" as a unit including a refrigeration compressor, condenser, evaporator, etc., specifically designed and tailored for applications such as walk-in type refrigerators. Individual components of the "packaged" unit will be classified in class 4130, or as otherwise specifically prescribed by the indexes and structure of the FSC. The complete "package" unit will be classified in class 4110.
53 suppliers registered
Includes: Wall Type Fans; Pedestal Type Fans; Household Type and Attic Type Exhaust Fans; Floor Fans; Forged Draft Exhaust and Disposal Kits; Fans, Air Circulators, and Blower Equipment, whether designated as "industrial" or "nonindustrial" by application and/or use.
Excludes: Combination Heater-Fans (FSC 4520).
Notes: Fans and impellers which are specifically designed for use with specific individual types of equipment are to be classified in the same classes as their next higher assemblies or in the appropriate components or accessories classes (as in
47 suppliers registered
Includes: Tool Grinding spot coolers; machining spot coolers; electronic equipment spot coolers; and electronic cabinet spot coolers.
Excludes: Refrigeration and Air Conditioning Plants (Classes 4110 and 4120); Air Conditioning Components and Cooler Unit, Air (Class 4130); Cooler, Air, Evaporative (Class 4120) and Pipe and Tube (Group 47).
4 suppliers registered
Includes: Fire Extinguishers; Fire Axes; Fire Rakes; Fire Beaters; Fire Trucks; Fire Hose; Play Pipes; Hose Fittings having one or more Fire Hose End Connections; Fire Hose Reels; Fire Fighting Trailers; Fire Hydrants; Sprinkler Heads.
Excludes: Wrecking Bars (FSC 5120, 1385).
80 suppliers registered
Includes: Diving and Salvage Apparatus, including Pressurized Divers´ Suits; Rescue Nets, Buoyant; Inflatable Life Vests; Life Rafts.
Excludes: Lifesaving Boats (FSC 1940).
55 suppliers registered
Notes: Excludes production type equipment designed for impregnation of metal castings and electronic components, processing of leather and textiles, and for similar industrial processing operations.
14 suppliers registered
Includes: Secondary Spill Containment Sumps; Liquid Spill Containment Pallets; Spill Containment Basins; Spill Containment Systems; Absorbent, Sorbent and Blotting Materials.
29 suppliers registered
Includes: Portable Fire Escapes; Safety Nets, Nonbuoyant.
Excludes: Divers´ Suits; Fixed Fire Escapes.
156 suppliers registered
Includes: Material and Machinery designed to remove, neutralize and/or prepare for possible re-use of substances otherwise considered to be un-reclaimable.
4 suppliers registered
Notes: This group excludes pumps and compressors designed for use on individual types of equipment, such as engine fuel pumps, aircraft propeller feathering pumps, fork lift operating pumps, compressors for operating gun turrets, and vehicular brake system compressors. Also excluded are items specially designed as or for use on fuel dispensing equipment. The FSC indexes and structure will govern the classification of these items permitted classification in a single class only.
Includes: Truck Mounted and Trailer Mounted Compressors.
Excludes: Refrigeration Compressors (FSC 4130).
56 suppliers registered
Excludes: Laboratory Jet Pumps (FSG 65 and 66).
80 suppliers registered
Excludes: Laboratory Centrifuges (FSG 65 and 66); Water Purification Filters (FSC 4610).
45 suppliers registered
Includes: Steam Boilers, over 15 pounds WSP. Marine Boilers; Boiler Drums; Water Heaters, Low Pressure (over 100 gallon recovery capacity).
10 suppliers registered
14 suppliers registered
Includes: Crucible Furnaces; Cupola Furnaces.
Excludes: Food Industry Ovens (FSC 7310); Metal Heat Treating Furnaces (FSC 3424); Laboratory Type Furnaces (FSC 6640).
11 suppliers registered
Includes: Evaporators.
11 suppliers registered
Includes: Electronic Precipitators; Dust Collection Equipment.
Excludes: Fan and Blower Equipment (FSC 4140); Air Conditioning Equipment (FSC 4120).
16 suppliers registered
Includes: Refueling Machines; Ion Chamber Seals; Thermal Barriers; Control Rods; Steam Generators, Pressurized Water; Reactor Vessel Shells; Handling Carts; Hoisting Units, New and Spent Cartridge.
Notes: This class includes all types of nuclear reactors and those items which are specifically designed for use within nuclear reactors, their primary cooling systems, auxiliary fluid systems, special propulsion plant systems, handling and servicing equipment, electrical and control systems, and associated special test and water chemistry control items. Excluded from this class are those items for which more specific classifications are suitable.
1 suppliers registered
Includes: Bathtubs; Commodes; Lavatories; Shower Cabinets; Sinks; Water Closets; Accessories and Component Parts, such as Dispensers, Faucets, Holders, Racks, Shower Heads, Flush Valves and Stop Valves.
Excludes: Fittings and Specialties for Hose, Pipe and Tube (FSC 4730).
22 suppliers registered
Includes: Boilers, 15 pounds WSP and under (for boilers over 15 pounds WSP, see FSC 4410); Domestic Water Storage Tanks through 100 gallon capacity; Fireplace Heaters; Furnaces; Space Heaters; Heating Radiators; Immersion Heaters; Water Heaters, through 100 gallon recovery capacity (for heaters over 100 gallons recovery capacity, see FSC 4410).
Excludes: Vehicle Heaters; (FSC 2540); Aircraft Heaters (FSC 1660).
26 suppliers registered
Includes: Oil Burners; Stokers; Gas Burners.
13 suppliers registered
Includes: Compactors; Destructors; Garbage Disposals; Incinerators; Septic Tanks.
30 suppliers registered
Includes: Demineralizers; Filtration Equipment; Ice and Snow Melters.
Excludes: Water Purification Compounds (FSC 6810 and 7930); Water Softening Compounds (FSC 6810 and 7930).
42 suppliers registered
Excludes: Laboratory Distillation Apparatus (FSC 6640).
17 suppliers registered
34 suppliers registered
Includes: Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.
Excludes: Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).
72 suppliers registered
Includes: Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.
Excludes: Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).
96 suppliers registered
Includes: Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.
Excludes: Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).
63 suppliers registered
Notes: This group may include specially designed valves for use on individual types of equipment or systems. Excluded are such items as tyre valves, engine intake and exhaust valves, explosive valves, carburetor valves, water mixing valves, and flush valves.
Includes: Electric Motor Operated Valves; Hydraulic Operated Valves; Solenoid Operated Valves.
Excludes: Engine Intake and Exhaust valves (FSC 2990, 2815); Valves specifically designed for use with fire fighting equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).
60 suppliers registered
Includes: Automatic Nonpowered Valves; Gate, Globe, Angle, Check, and Relief Valves; Cocks.
Excludes: Fire Hydrants (FSC 4210); Sprinkler Heads (FSC 4210); Valves specifically designed for use with fire fighting Equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).
79 suppliers registered
Notes: Specialized equipment which is designed for automotive maintenance and repair, and which is also used for the maintenance and repair of nonautomotive vehicles or equipment, will be classified in Class 4910. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in this group. However, jigs, fixtures, and templates used in conjunction with metalworking machinery are classified in Group 34. Infrared assemblies, subassemblies, and components specifically designed as test and maintenance specialized equipment are classified in the appropriate classes of this group. Excluded from this group is infrared equipment designed for testing communications and night vision equipment.
Includes: Automotive Lifts; Wheel Aligners; Brake Service Equipment; Tire Maintenance and Repair Equipment; Test stands and test equipment specially designed for use with motor vehicles.
Excludes: Hand Tools (FSG 51); Lubrication and Fuel Dispensing Equipment (FSC 4930); Basic types of electrical and electronic test instruments, including those specifically designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments as shown in the indexes in the FSC (FSC 6625).
65 suppliers registered
Includes: Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilop, fire control, flight control, and navigational systems.
Excludes: Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.
85 suppliers registered
Includes: Specially designed maintenance, test, checkout, and repair shop specialized equipment for maintenance and repair of torpedoes, torpedo components; adapters, fixtures, inspection and holding fixtures, leveling jack assemblies, fuel filling and syphon assemblies, control surface adapter and protractor assemblies, afterbody cradle adapter and tilting mount assemblies, pressure air heater assemblies, motor drier and puller assemblies, test stand levels and stands for overhaul, maintenance, test, cheakout, and repair of torpedo and torpedo components, test panels, fixtures, and test sets for electrical circuits, firing circuits and torpedo test sets.
Excludes: Specially designed maintenance test, checkout and repair shop specialized equipment for maintenance and repair of ammunition, guided missiles, rockets, fire control, space vehicles, underwater mines, depth charges and nuclear ordnance. Also excludes "basic" types of electrical and electronic test instruments, such as ammeters, voltmeters, ohmmeters, multimeters, galvanometers and similar instruments.
12 suppliers registered
Includes: Specially designed maintenance, test, checkout and repair shop specialized equipment for maintenance and repair of depth charges and underwater mines; adapters, inspection, test and holding fixtures; stands for overhaul, maintenance, test, checkout, and repair of underwater mines and depth charges; test fixtures, panels plus assemblies and test sets for leak test, pressure test, firing circuits and timing devices.
Excludes: Specially designed maintenance, test, checkout, and repair shop equipment designed for nuclear ordnance, guided missiles, ammunition, torpedoes, rockets, fire control, space vehicles and "basic" types of electrical and electronic test intruments.
6 suppliers registered
Includes: Specially designed maintenance, test, checkout, and repair shop specialized equipment, for maintenance and repair of ammunition items; adapters, ammunition feeders and hoppers; inspection and holding fixtures; linkers, linkers-delinkers, and delinkers to assemble and disassemble ammunition belts; surveillance ovens; explosimeters; primer firing device fixtures; mandrels; repositioning machines; gas bomb service kits; test fixtures; panels; plug assemblies; and test sets for ammunition maintenance, checkout and repair.
Excludes: Maintenance, repair, checkout and test equipment specially designed for use with guided missiles, guided missile remote control systems, guided missile systems; fire control; nuclear ordnance; rockets, underwater mines and depth charges; torpedoes; space vehicles and test equipment for aircraft weapon launchers; basic types of electrical and electronic test instruments, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC.
14 suppliers registered
Includes: Specially designed maintenance, test, checkout, and repair shop specialized equipment for maintenance and repair of rockets and rocket components; rocket maintenance stands; test stands; fixtures; jigs; and shop equipment designed for maintenance and repair of rockets, rocket motors and other rocket components.
Excludes: Specially designed maintenance, test, checkout, and repair shop equipment specifically designed for nuclear ordnance, guided missiles, fire control, torpedoes, underwater mines, depth charges, ammunition, space vehicles; test equipment for aircraft rocket launchers and "basic" types of electrical and electronic test instruments, such as ammeters, voltmeters, ohmmeters, multimeters, galvanometers and similar instruments.
9 suppliers registered
Includes: Hand Grease Guns; Centralized Lubrication Systems; Hydrostatic Lubricators; Oil and Gasoline Dispensing Pumps; Fuel Oil Dispensing Pumps; Hand Oilers; Grease Dispensers; Pressure Gun Attachments; Sight Feed Lubricators.
Excludes: Alemite and Lubrication Fittings (FSC 4730).
17 suppliers registered
Includes: Specially Designed Test Equipment, Maintenance Fixtures and Stands.
Excludes: Instruments for use on both Fire Control and other Equipment; Airborne Fire Control Maintenance and Repair Shop Equipment.
14 suppliers registered
Includes: Maintenance Stands, Fixtures, and Jigs.
Excludes: Atomic Ordnance Maintenance and Repair Shop Specialized Equipment; Airborne Weapons Maintenance and Repair Shop Equipment.
21 suppliers registered
Includes: Checkout equipment and test equipment specially designed for use with guided missiles and guided missile remote control systems.
Excludes: Specially designed internal (built-in) checkout equipment for guided missile remote control systems; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.
10 suppliers registered
Includes: Paint Spraying Equipment.
Excludes: Hand Tools (FSG 51).
93 suppliers registered
Includes: Checkout and Test Equipment specially designed for use with Space Vehicles, including Remote Control Systems.
Excludes: Checkout and Test Equipment used with both Guided Missiles and Space Vehicles; Specially designed Internal (Built-in) Checkout Equipment for Remote Control Systems; Basic types of Electrical and Electronic Test Instruments, including those specially designed, such as ammeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC.
10 suppliers registered
Notes: Note Maintenance, test, checkout and repair shop equipment designed to test, maintain, fault isolate and repair multiple guided weapon systems. For equipment designed to be used with only one specific system see the individual FSC indexed (i.e., 4921, 4927, 4935).
7 suppliers registered
Includes: Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.
31 suppliers registered
Includes: Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors´ Jacks; Wrecking Bars; Glue Pots; Blowtorches.
Excludes: Craftsman´s Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.
34 suppliers registered
Includes: Drills; Riveters; Portable Electric Saws; Pneumatic Tools; Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.
31 suppliers registered
20 suppliers registered
Excludes: Punching, Stamping, and Marking Dies.
16 suppliers registered
25 suppliers registered
Notes: This class includes sets, kits and outfits consisting of several different items classifiable either in a single class or in several classes. Excluded from this class are sets, kits and outfits consisting of variations (such as size or colour) of an item. Classify these items in the same class as the individual item.
44 suppliers registered
Includes: Calipers; Levels; Micrometers; Plumb Bobs; Precision Tapes; Squares; Angle Gages; Center Gages; Depth Gages; Draw Gages; Drill Point Gages; Fillet and Radius Gages; Glaziers´ Gages; Height Gages (Vernier); Planer Gages; Rivet Selector Gages; Saw Tooth Set Gages; Screw Pitch Gages, Surface Gages; Telescoping Gages; Thinkness Gages; Tube Bend Gages; Tube Flare Gages; Twist Drill Gages; Twist Drill and Rod Gages; Twist Drill and Tap Gages; Taper-Wire-Thickness Gages; Wire Gages; Toll Setting Planer and Shaper Gages; Gage Blocks.
Notes: This class does not include special inspection gages, which are classified in Class 5220.
18 suppliers registered
Includes: Go and Not-Go Gages, including Plug, Ring, Snap, Thread, and Length Gages; Profile Gages; Fixture Gages; Special Inspection Gages.
Notes: Special inspection gages are included in this class.
31 suppliers registered
16 suppliers registered
32 suppliers registered
39 suppliers registered
29 suppliers registered
Includes: Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.
Excludes: Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).
Notes: Note Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
37 suppliers registered
Includes: Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.
Excludes: Shafts (FSC 3040); Lock Keys (FSC 5340).
Notes: Note Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g.,shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.
17 suppliers registered
27 suppliers registered
Includes: Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.
46 suppliers registered
Includes: General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.
Excludes: O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.
Notes: Note This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.
22 suppliers registered
Excludes: Packing and Gasket Material (FSC 5330).
32 suppliers registered
Includes: Insect Screening; Industrial Metal Cloth; Industrial Metal Mesh.
Excludes: Fencing (FSC 5660).
Notes: Note Metal Screening is a perforated plate or cylinder or a meshed wire fabric usually mounted and used to separate coarse from finer parts.
5 suppliers registered
Includes: Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.
Excludes: Weapons System Hardware (FSC 5342).
Notes: Note Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing e.g., hinges, door locks).
20 suppliers registered
Includes: Angle Brackets; Double Angle Brackets; Mounting Brackets.
Excludes: Corner Braces (FSC 5340); "T" Braces (FSC 5340); Mending Plates (FSC 5340).
Notes: Note All brackets, including specially designed for specific use an/or application, will be classified in this FSC. Brackets are items of rigid construction that sustain a secondary item.
6 suppliers registered
Includes: Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.
Excludes: Commercial Hardware (FSC 5340).
Notes: Note Hardware designed for weapon systems unique applications will be classified in this FSC.
previous page